What changed in each release

Roughly monthly, except for crash fixes, which go out as soon as they are done. What is coming is on the roadmap.

1.1.013 November 2026

Drawing sets, speed on large models, and services routing that finds its own way.

  • Drawing sets: switch between existing state, demolition, new state and building services right in the model window. Each set gets its own scenes and its own sheets in LayOut, and you can add your own sets with your own tags
  • LayOut export can be limited to the drawing set you choose
  • Large models: turning Plan on recalculates only the active storey, section fills are about three times faster, and editing a slab or a wall no longer rebuilds the whole storey
  • Update a single plan or a single section from its row in the Project panel, instead of all of them at once
  • A fast working 3D style on the 3D button: no profiles, fog or ambient occlusion, so a big model turns smoothly. Your own style stays in the model
  • Services routing: routes snap to the axis of ports, pipes and risers, run out of a port along its axis and turn at right angles into the target, also when you point at a riser or a pipe in the middle of a route
  • Risers split by storey as you draw them, so each storey has its own piece in plans, schedules and IFC. Stretching a riser through a floor splits it too, and Split by Storeys does the same for risers drawn before
  • Parallel Run: a second route of another system (hot next to cold, return next to supply) at a set distance
  • One click for services: the MEP pill in the Project panel switches to a view just for services, then hides services while you work on the building, then shows everything again
  • Garage doors: sectional doors as a door type, with plan symbol, schedule mark and IFC data (IfcDoor, SECTIONAL)
  • Move, copy and edit windows and doors directly in plan view
  • Walls and strip footings as a rectangle, wall alignment with the arrow keys while drawing, and an Open joint in the Joint tool. Slabs, roofs and zones switch between rectangle and polygon even after the first click
  • Base offset for walls and columns, for partitions standing on the structural slab under the floor build-up
  • Stairs and ramps ask which storey they lead to
  • Frameless glass railings
  • A warning when you draw outside the active storey
  • Library: a lift, a urinal, mirrors, bathroom towel radiators, and a mounting height you set while placing an object or later with Set Mounting Height
  • Material schedule by the layers of each build-up
  • Switching between 3D, plans and sections keeps the part of the model you were looking at
  • The thickness of a wall, slab or roof with a build-up now always follows the build-up
  • Archeform checks once a day whether a new version is out. Nothing about you or your model is sent, and you can turn it off in Project Settings › Updates
  • IFC: storey elevations, project and building information, terrain as a site element, transparent glass and colours on windows and doors, and windows and doors no longer written twice, and Create Library Object offers IFC classes for building services equipment
  • Section marks are drawn on top of the model instead of under the hatches
  • Fixes: corners where three or more walls meet keep their mitres; plugin geometry no longer lands on your active tag; dialog buttons stay inside the window; a possible freeze on some Windows computers is gone
  • More fixes: decimal numbers can be typed while drawing on Windows, including on the numeric keypad; a length typed with a decimal point in a model set to centimetres or metres is no longer a thousand times too small; an opening widened past the end of a wall no longer disappears, and changing its width keeps it centred; a build-up made on another computer shows in the element dialog and OK no longer removes it; a face-aligned wall joins a corner of centre-aligned walls; copying a storey keeps a floor that sits on the ceiling of the storey below; and Add Layers no longer freezes SketchUp on a large model
1.0.52 November 2026

Speed on large models, IFC units, and fixes.

  • Large models no longer stall SketchUp: switching storeys, clicking OK in an element dialog or in Project Settings, turning on Plan or FLAT, and editing slabs and walls next to pipework now take a moment instead of tens of seconds
  • IFC quantities are written in metres, square metres and cubic metres, and lengths in property sets in millimetres. Models from earlier versions are converted when you open them (one Undo step); a model saved by 1.0.5 shows wrong quantities in the dialogs of an older version
  • Net wall area and volume deduct the openings, by their real shape, in the wall schedule and in IFC
  • Washbasins, baths, showers, WCs and kitchen units from the library have cold and hot water ports (WCs cold only). Objects placed earlier keep the old ports; place them again
  • Pipe reducers are drawn as a tapered outline in plans, and rectangular reducers that change the aspect ratio are created instead of leaving a gap. Vertical rectangular ducts show their real cross-section in plans
  • A route snaps only to ports of the system being drawn, so cold water no longer connects to a hot water outlet. Copied storeys keep the colours of MEP systems
  • Wall chains and slab, roof and zone outlines close only when you click the first point, not when a point lands near it
  • Corners between walls with different justification are mitred the right way round, and so are strip footings under them
  • Undo after Stretch no longer leaves a wall, beam, footing, pipe or railing hidden
  • The SITE switch hides the terrain in the working Plan as well, and turning FLAT off restores hand-painted terrain faces instead of painting the whole terrain one colour
  • Merge Facade Edges removes the line at every slab edge, and two thin layers of a composition no longer merge into one band in the section fill
  • Placing a library object reuses the definition already in the model, and the object sits on the surface under the cursor instead of sinking into the slab
  • Slab defaults keep the Pset values entered in the defaults dialog
1.0.417 October 2026

Fixes.

  • Hip roofs on a plan turned away from the model axes: a house with wings drawn at an angle no longer falls back to a flat roof
  • No line across a roof plane where a wing splits one long eave into two parts. Existing roofs are fixed when you confirm them in the roof dialog
  • Walls drawn in 3D stay on the storey floor: the preview no longer jumps up with Shift, and the walls are no longer created above the floor
  • Column grids, columns and zones drawn in 3D in a storey below ±0.000 are placed on that storey’s floor instead of on zero. Slabs and footings do the same when you click into empty space
  • Columns placed by a column grid are hatched in plans and sections
  • Storeys below ±0.000 are counted downwards. Changing the height of a basement keeps its ceiling and moves its floor; inserting or duplicating a storey below zero pushes the lower storeys down instead of lifting the whole building
  • The FLAT button is off in a new model, so the first click turns it on
1.0.312 October 2026

Trial without a key, and fixes.

  • The 30-day trial now starts inside SketchUp. No key, no e-mail, no internet connection: install, open the License window and click Start 30-day trial
  • Need longer to decide? A one-time key for 14 more days is available by e-mail
  • Deactivate this computer works on Windows — the confirmation used to be invisible, so the button did nothing
  • After you enter a storey by double-clicking it, railings, pipes and library objects are placed on that storey’s floor, not on the storey last picked in the Project panel
  • Switching the FLAT drawing view off no longer leaves elements without their textures when Project Settings or Purge Unused was used in between
1.0.27 October 2026

Fixes.

  • Property dialogs no longer write values into the wrong element when a dialog was left open and another element was picked. The window title now says which element it belongs to
  • Window & door schedule: subtotals and the total row are filled in, with area counted for every piece
  • Multi-leaf windows: leaf widths are entered as real percentages, and the leaf layout saved in the tool defaults is kept
  • Surface materials from the SketchUp library are found on Windows as well; a message appears when a material is missing instead of nothing happening
  • No stray line around the walls in 3D after changing an element’s material
  • Custom window shapes are set with Insert Opening → Custom Window only; the faulty “Pick shape” button in the opening dialog is gone
1.0.12 October 2026

First public release.

  • Fourteen element types with dialogs, IFC classes, quantities and 2D symbols
  • IFC4 export with material layers, openings and their fills
  • Plans, elevations and named sections with per-material hatching
  • Room and MEP schedules, CSV export
  • LayOut export at a fixed scale
  • Model check for duplicate identities and names
  • Licence by key: 30-day trial without a card, two computers per licence, three weeks offline
  • Labs: AI connector for building a model from a conversation
archeform

BIM tools for small practices, built by a chartered engineer in the Czech Republic.

News by e-mail

Product news and occasional updates. Unsubscribe any time — privacy policy.

Product

FeaturesPricingDownloadChangelogRoadmap

Learn

DocumentationGetting startedVideo tutorialsIFC referenceTroubleshootingBlogSupport

Archeform

AboutTopo soonArcheform IFC for MacContactPressPartnersLegal
© 2026 Archeform s.r.o.Žitenice, Czech RepublicNot affiliated with Trimble Inc.SketchUp is a trademark of Trimble Inc.